Tai 906A horizontal cylindrical triple walled high pressure autoclave with outer square body

The inner/outer chamber, steam jacket and boiler are made of heavy gauge SS with leak proof argon arc welding.
The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.
Hydraulically tested to withstand 2.5 times the working pressure.
Steam boiler is fitted with water level indicator, pressure gauge, low water cut off device and automatic pressure control devices. Fitted with safety valve as a safety device.
Drain valve is fitted at the side bottom for easy draining/clearing.
This affords a complete safety to the working personnel against explosive opening.
Two separate valves are provided for evacuating steam from inner chamber and jacket as and when desired.
Sterilization cycle is controlled by single point multiport valve.
The chamber is fitted with spring loaded safety valve and a dead weight release valve.
To work on 220/230 or 440 volts, 3 phase, 50 Hz AC supply.

Model No.	16 x 24	16 x 36	16 x 48	20 x 36	20 x 48
Inner Dimension	400 x 600	400 x 900	400 x 1200	500 x 900	500 x 1200
Capacity	78 Litres	115 Litres	162 Litres	165 Litres	221 Litres
Heater Load	6 KW	6 KW	9 KW	9 KW	9 KW

TECHNICAL SPECIFICATION:-

Pressure Vessel= SS 304 Grade Stainless Steel
Exhaust pressure: manual through the exhaust valve
Gasket: made of joint less silicon rubber.
Sterilizing pressure: 1.2 to 1.5 kgf/cm2 (15 to 20 psi) at 121 C
Pressure gauge: 0.2.1 kgf/cm2 (30 psi)
Tubular stand and supporting ring: made of mild steel or stainless steel
Operating pressure: from 15 psi to 20 psi
Top Lid=SS 304 Grade Stainless Steel
Basket= SS 304 High Grade Stainless Steel